2k clear coat high gloss

high gloss 2k clear coat lacquer for scale modeling used over zero paints, gravity colors
Premium 2K urethane clear lacquer. Excellent hardness, gloss and chemical resistance. Show Clear Automotive Grade Top-coat for scale-modelers, fishing lure builders, and other creative enthusiasts.  for airbrush with 0.3-0.5mm nozzle use 2:1 clearcoat: activator and reduce at least 2:1  Included:  2oz bottle of show clear 1oz jar of activator 1oz jar of reducer  Can be applied over Zero paints, Gravity colors, Tamiya, Mr. Color and any other solvent or water-based paint.  Great quality product made in US, bottled by NO-NAME Brand in Florida Based on American Icon clear coat.  Technical Data Info  SURFACE PREPARATION 1. Allow the final coat of basecoat to dry to touch prior to applying C-800 ICON CLEAR. 2. Use a tack cloth to remove any surface contaminates that may have settled on the basecoat. 3. Apply C-800 ICON CLEAR. PREVIOUSLY FINISHED SURFACES: 1. Sand surface with P600 wet or dry, and then clean with R-S200 SURFACE CLEANER. REMEMBER TO STIR THIS PRODUCT BEFORE USE. MIXING RATIO 2:1 2 parts C-800 ICON CLEAR to 1 part A-S060, A-M070 or A-F080 ACTIVATOR. NOTE: Substrate temperature for application minimum 50 °F and maximum 100 °F APPLICATION INFORMATION Apply 2-3 full wet coats with 50% overlap. Pot Life 3-5 hours @ 70° F/21° C depending on temperature, humidity and activator selection. DRY/FLASH TIMES Dry Times at 70°F/21°C 1st Coat Flash Time: 10-15 minutes 2nd Coat Flash Time: 15-20 minutes Dust Free: 30-60 minutes depending on temperature / activator selection Polish / Deliver: 16-24 hours AIR DRY Dry Times: 16-24 hours at 70° F / 21° C Recoat: Repair and recoat after 10-14 hours FORCE DRY PurgeTime: 15 minutes Bake Time: 30 minutes at 140° F / 60° C Recoat: Repair and recoat after 1 hour cool down. POLISHING AIR DRY 16-24 hours FORCE DRY After 1 hour cool down CLEAN UP INSTRUCTIONS Clean all equipment immediately after use. At the same time, flush out all fluid lines and carefully clean pressure pots. Use clean solvent only. It is also good practice to periodically clean the spray tip or the fluid tip/air cap combination during the course of the working day or shift. Coating category: Clear coating. Actual VOC does not exceed 4.3 Lb/gal (516 g/L). Regulatory VOC does not exceed 4.3 Lb/gal (516 g/L). RFU VOC does not exceed 4.18 Lb/gal (501 g/L). INFORMATION: If used as instructed, this product is designed to comply with the US National Volatile Organic Compound (VOC) Emission Standard for Automobile Refinish Coatings. Confirm compliance with state and local air quality rules before use. Rule 102: Photochemically reactive. SAFETY INFORMATION WARNING: This product contains chemical(s) known to the State of California to cause cancer and/or to cause birth defects or other reproductive harm. DANGER: Flammable liquid and vapor. May cause an allergic skin reaction. Suspected of causing cancer. May cause drowsiness or dizziness. May be fatal if swallowed and enters airways. May cause damage to organs through prolonged or repeated exposure. PREVENTION: Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear protective gloves/ protective clothing/eye protection/face protection. Contaminated work clothing should not be allowed out of the workplace. Do not breathe dust/fume/ gas/mist/vapors/spray. Use only outdoors or in a well-ventilated area. P210 - Keep away from heat/ sparks/open flames/hot surfaces. - No smoking. Keep container tightly closed. Ground/bond container and receiving equipment. Use explosion-proof electrical/ ventilating/ lighting/ equipment. Use only nonsparking tools. Take precautionary measures against static discharge. RESPONSE: IF exposed or concerned: Get medical advice/attention. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persi…

, Repair the scuffs and scrapes on your vehicle with our premium-quality paint repair products that will leave you with an original factory

2K High Gloss Clear Coat Spray/Aerosol Can – Professional Quality & Finish - Easy to Use – Best Value (4 pack)

Trust 2K High Gloss 4:1 Clear coat Gallon W/ FAST Hardener

SprayMax 3680061 2K Glamour High Gloss Aerosol Clear

High Gloss Weather Resistant Transparent Liquid State Automotive

2K Clear Coat High Gloss Spray Cans (3) - ERA Paints

Car-Rep 2K PRO Polyurethane Clear Coat, High Gloss No Activation or Mixing Always Ready to Spray Universal Compatibility Professional Results Car-Rep

Car Rep 2K Pro Clear Coat High Gloss

High Gloss Weather Resistant Transparent Liquid State Automotive

Spray Max 2K Clear Glamour - Product Review (Andy's Garage

Spray Max USC 2K High Gloss Clearcoat Aerosol

High Teck 8000 Value 2K Clear Coat GALLON Clear High Gloss