3 QuickSeam Splice Tape (2-sided), 50' roll

This 3 wide 2 sided adhesive tape is factory laminated to an EPDM membrane that is used to join two pieces of PondGard liner together in stream applications or if you just want to add strength to a seam beneath cover tape.
This 3 wide 2 sided adhesive tape is factory laminated to an EPDM membrane that is used to join two pieces of PondGard liner together in stream applications or if you just want to add strength to a seam beneath cover tape. Requires cleaning of liner with QuickPrime Adhesive to improve tape adhesion. This product is a 10 foot roll of 3 wide 2 sided tape. Info on seaming liners: When seaming two EPDM liners together in a non-stream application, overlap clean liners, fold back to expose meeting surfaces and apply QuickPrime Adhesive with the QuickScrubber Tool wherever the liners will touch. When dry to the touch apply 2 sided tape to bottom liner and carefully fold top liner onto tape. Then roll top liner thoroughly with a seam roller to contact all surfaces and remove any air bubbles. Reapply QuickPrime over joint where liners meet. When dry to the touch, apply cover tape over joint and roll again with seam roller. When joining liners in a stream situation, we recommend only using the two sided tape instead of both to create a smooth shingle effect for water flow.

This 3 wide 2 sided adhesive tape is factory laminated to an EPDM membrane that is used to join two pieces of PondGard liner together in stream applications or if you just want to add strength to a seam beneath cover tape. Requires cleaning of liner with QuickPrime Adhesive to improve tape adhesion. This product is a 10 foot roll of 3 wide 2 sided tape.

Info on seaming liners: When seaming two EPDM liners together in a non-stream application, overlap clean liners, fold back to expose meeting surfaces and apply QuickPrime Adhesive with the QuickScrubber Tool wherever the liners will touch. When dry to the touch apply 2 sided tape to bottom liner and carefully fold top liner onto tape. Then roll top liner thoroughly with a seam roller to contact all surfaces and remove any air bubbles. Reapply QuickPrime over joint where liners meet. When dry to the touch, apply cover tape over joint and roll again with seam roller. When joining liners in a stream situation, we recommend only using the two sided tape instead of both to create a smooth shingle effect for water flow.

Russ Strip Mechanical Bonding

3M Scotch 130C Linerless Splicing Tape, 2 x 30ft

6 x 100' EPDM Flashing Tape - Anjon Manufacturing

Aquascape - EPDM Liner One-Sided Cover Tape - 6 x 100

3M Scotch Linerless Electrical Splicing Tape 130C for Wires and Cables, 1-1/ 2 in x 30 ft, Rubber Backing, Self Fusing, UV Resistance, Highly Conformable, Moisture Seal, Black, 1 Roll: Electrical Tape:

Aquascape EPDM Pond Liner Cover Tape. This single sided cover tape used for seaming and repairing rubber liner works best on a clean surface that has been primed with pond liner primer.

Aquascape - EPDM Liner One-Sided Cover Tape - 6 x 25

3M Splicing & Tabbing Tapes

Pond Liners (EPDM) & Underlays - Webb's Water Gardens

3M Splicing & Tabbing Tapes

3M Flying Tape Colour Azul dodger