8 x 5 inch Tray Silicone Mold – JussCraftinAround

4.5

(427)

Write Review

$ 44.99

Add to Cart

Qty

In stock

Description

Any bubbles located on the bottom of the mold due to the fact that this silicone does not require vacuum degassing, and will not affect the inside of the mold or the finished product

The physical life of the mold depends on how you use it (materials cast, frequency, etc.). Casting abrasive materials such as concrete can quickly erode mold detail, while casting non-abrasive materials (wax) will not affect mold detail. Before storing, the mold can be gently cleaned with a soap solution and rinsed with water. Rubbing the mold repeatedly or with things such as fabric and paper towels can cause scratches to the shine which will cause imperfections in the details. Molds should be stored on a level surface in a cool, dry environment.

HEAT

Most artists apply heat to pop bubbles in resin once it has been poured, doing this can be harmful to your silicone mold. It can and WILL burn the resin and can damage the mold as well. The resin can burn and fuse to the silicone and if the silicone is damaged, it will cause imperfections in the finished product or cause the heated resin to stick to the silicone mold, damaging the mold itself. If you want to pop the bubbles do so with a torch or heat gun before putting it into the mold.

All molds are made to order, brand new and never used. Once orders are placed, it takes 7-10 days to process.

MOLDS ARE MADE TO ORDER AND ARE NOT RETURNABLE OR REFUNDABLE ONCE USED

Finished piece once demolded will measure 8 x 5 inches X .5

This Tray mold is made from soft, tear resistant, very low long term shrinkage silicone. It is great or casting wax, gypsum, resins, concrete and other materials and is heat resistant up to 450°F. The tray is made from stacking acrylic pieces together so there may be slight lines noticeable on the outside of the finished product. Any bubbles located on the bottom of the mold due to the fact that this silicone does not require vacuum degassing, and will not affect the inside of the mold or the finished product The physical life of the mold depends on how you use it (materials cast, frequency, etc.). Casting abrasive materials such as concrete can quickly erode mold detail, while casting non-abrasive materials (wax) will not affect mold detail. Before storing, the mold can be gently cleaned with a soap solution and rinsed with water. Rubbing the mold repeatedly or with things such as fabric and paper towels can cause scratches to the shine which will cause imperfections in the details. Molds should be stored on a level surface in a cool, dry environment. HEAT Most artists apply heat to pop bubbles in resin once it has been poured, doing this can be harmful to your silicone mold. It can and WILL burn the resin and can damage the mold as well. The resin can burn and fuse to the silicone and if the silicone is damaged, it will cause imperfections in the finished product or cause the heated resin to stick to the silicone mold, damaging the mold itself. If you want to pop the bubbles do so with a torch or heat gun before putting it into the mold. All molds are made to order, brand new and never used. Once orders are placed, it takes 7-10 days to process. MOLDS ARE MADE TO ORDER AND ARE NOT RETURNABLE OR REFUNDABLE ONCE USED Finished piece once demolded will measure 8 x 5 inches X .5

JustKraft 8 Inch Square Deep Casting, Resin Silicone Mould

Chill juice, soft drinks, tea, water, cocktails, and other refreshing drinks with the Large Ice Cube Tray by Home-Complete. This BPA-free silicone ice cube tray is flexible for easy release while still durable enough to cover many dinner events, parties, and barbecues over its long lifespan. The ice tray's eight 2x2x2-inch molds let you create large, beautiful ice cubes, adding impressive visual impact and reliable cooling to your favorite beverages.