10T L-320CN Carbon Eye Hook – AAA Wire Rope & Splicing, Inc.
All Crosby L-320 Eye Hoist Hooks incorporate the following features: The most complete line of Eye hoist hooks. Available in carbon steel and alloy steel. Designed with a 5:1 Design Factor for (Carbon Steel); 4.5:1 Design Factor for 30t - 60t (Alloy Steel). Eye hooks are load rated. Proper design, careful forging and p
All Crosby L-320 Eye Hoist Hooks incorporate the following features: The most complete line of Eye hoist hooks. Available in carbon steel and alloy steel. Designed with a 5:1 Design Factor for (Carbon Steel); 4.5:1 Design Factor for 30t - 60t (Alloy Steel). Eye hooks are load rated. Proper design, careful forging and precision controlled quenched and tempering give maximum strength without excessive weight and bulk. Every Crosby Eye Hook is equipped with a latch. Even years after purchase of the original hook, latch assemblies can be added. (See pages 121 - 123) Chemical analysis and tensile tests performed on each PIC to verify chemistry and mechanical properties. Type Approval certification in accordance with ABS 2016 Steel Vessel and Guide for Certification of Lifting Appliances 2016 available. Certificates available when requested at time of order and may include additional charges. Meets ASME B30.10 Hoist hooks incorporate two types of strategically placed markings forged into the product which address two (2) QUIC-CHECK features: Deformation Indicators and Angle Indicators (see following page for detailed definition). The following additional features have been incorporated in the new Crosby L-320N Eye Hoist Hooks. (Sizes 3/4 metric ton Carbon through 22 metric ton Alloy.) Metric Rated at 5:1 Design Factor for (Carbon Steel); 5:1 Design Factor for 1t - 22t (Alloy Steel). Can be proof tested to 2 times the Working Load Limit. Low profile hook tip. New integrated latch (S-4320) meets the world-class standard for lifting. Heavy duty stamped latch interlocks with the hook tip. High cycle, long life spring. When secured with proper cotter pin through the hole in the tip of hook, meets the intent of OSHA Rule 1926.1431(g) and 1926.1501(g) for personnel hoisting. Hoist hooks incorporate markings forged into the product which address two (2) QUIC-CHECK features. Deformation Indicators -- Two strategically placed marks, one just below the shank or eye and the other on the hook tip, which allows for a QUIC-CHECK measurement to determine if the throat opening has changed, thus indicating abuse or overload. To check, use a measuring device (i.e. tape measure) to measure the distance between the marks. The marks should align to either an inch or half-inch increment on the measuring device. If the measurement does not meet this criteria, the hook should be inspected further for possible damage. Angle Indicators -- Indicates the maximum included angle which is allowed between two (2) sling legs in the hook. These indicators also provide the opportunity to approximate other included angles between two sling legs.
Crosby L-320 Eye Hooks - BC Wire Rope
Products - AAA Wire Rope & Splicing
Crosby L-320CN Eye Hoist Hook with Latch
China 320C U.S TYPE EYE HOOK Manufacturers and Suppliers
Wire Rope - AAA Wire Rope & Splicing
Yale YK 10 Ton Wire Rope Hoist, 20/3.3 fpm Dual Speed, Three Phase, 20ft Lift YKC-L10-020S420-2
Crosby L-320AN Eye Hooks from Bishop Lifting
Crosby L-320CN Eye Hoist Hook with Latch
Crosby L-320AN Eye Hooks from Bishop Lifting
)
