Convex Double Faced Force-Fit Grommets - 10mm Inner Width - 12 Pack – bringberry Handbag Hardware and Designs

  These Convex Double Faced Snap Grommets look great from both sides and feature a smooth glossy finish. They are easy to install  and will accommodate up to a 10mm wide strap or drawstring. Perfect for a modern upscale drawstring bag or pair them with a gate rings as a strap connector  or use them as a decorative e

These Convex Double Faced Snap Grommets look great from both sides and feature a smooth glossy finish. They are easy to install  and will accommodate up to a 10mm wide strap or drawstring.

Perfect for a modern upscale drawstring bag or pair them with a gate rings as a strap connector  or use them as a decorative element on your bag or clothing.  Their slightly wider face give them a sleek professional look.

Each grommet consists of one male part and one female part, and are easily installed using a 3/8 or 7/16 setter and anvil, a grommet press or rubber mallet. 

These grommets have little teeth on the underside which pierce your exterior and inner substrates which in turn, provide added security to keep the grommet in place.  Adding a dab of glue will also aid in preventing the grommet from turning or popping out of the hole.

***  Sold in packages of Twelve.  You will receive 12 male pieces and 12 female pieces.

Note:  These need actual force to push together; they are not the click together kind found by some suppliers which in my opinion are not as heavy duty. These can be installed with a Grommet/Rivet Press, a Rubber Mallet or by using a grommet awl.

Installation: Place the male part on your anvil. The male part is slightly smaller in width and will nestle within the the female part. Place the female part on top of the male part and insert your setter. Give the setter a couple of hard taps with a hammer or until the male part is fully inserted and flush with the female part cap. To protect your grommets from being scratched, it is advisable to place a small piece of fabric between the grommet parts and the anvil and setter.  

Grommets – bringberry Handbag Hardware and Designs

BringBerry Handbag Hardware and Designs – bringberry Handbag

Slightly Less Than Perfect -- Smooth Top Force Fit Grommets

Convex Double Faced Force-Fit Grommets - 10mm Inner Width - 12

Force Fit Grommets Hardware 1/2 Hole pack of 2 Pairs

BringBerry Handbag Hardware and Designs – bringberry Handbag

Grommets – bringberry Handbag Hardware and Designs

Grommets – bringberry Handbag Hardware and Designs

Force Fit Grommets – Fireweed Stitches LLC

Extra Wide Fit Oval Grommets - Inner Width 25mm (1 Inch) - Sold

Round Force Fit Double Facing Grommets - Inner Width 14.9mm (~5

Convex Double Faced Force-Fit Grommets - 10mm Inner Width - 12