Flush Cutters (Wire Cutters) – Out of Darts

PRODUCT DESCRIPTION:The Flush Cutter Wire Cutters are used constantly in our shop for cutting away bits of plastic inside of blasters, as well as cutting off solder and stock wiring. We tend to cycle the pairs, starting with wire cutting, then used for plastic after they dull from extended use (after hundreds to thousa
PRODUCT DESCRIPTION:The Flush Cutter Wire Cutters are used constantly in our shop for cutting away bits of plastic inside of blasters, as well as cutting off solder and stock wiring. We tend to cycle the pairs, starting with wire cutting, then used for plastic after they dull from extended use (after hundreds to thousands of cuts). These are not intended for cutting springs! Only use bolt cutters to cut a spring and wear proper eye protection. FEATURES: • Tempered steel blades • Great for cutting wire and plastic, and trimming blaster shells • Do not cut springs with these cutters. Use bolt cutters (with eye protection). SPECS: • Material: Hardened steel ADDITIONAL LINKS:• Hobby Wire• Safety Glasses

Form Dart Flush Cutters - Pack of 1: Wire Jewelry

TOOLEAGUE Wire Flush Cutters, 7-inch C-RV Ultra Sharp Flush Cut

Flush Cutter, Wire Cutters, BS-8109 Soft Wire Cutter Pliers

Spring Loaded Flush Cutter - Vaping Coil Wire Cutters - RDA Wire

Klein Tools 5 in. Light Weight Flush Cutter Pliers D2755 - The

Spring Loaded Flush Cutter - Vaping Coil Wire Cutters - RDA Wire

Use this pack of 2 diagonal cutters to cut soft and half-hard wires, including aluminum, copper, gold-fill, and silver-fill wires. The jewelry wire

2 Pack CR-V Wire Flush Cutters, Soft Wire Side Cutters for Jewelry Making (Yellow, 7.5 Inch)

Description These are simple flush cutters from Excelite that give you a way to cut leads very cleanly and close to the solder joint. Diagonal cutters

Flush Cutters - Xcelite

Klein Tools 5 in. Light Weight Flush Cutter Pliers D2755 - The