70W CO2 Laser Engraver Cutting Machine with 16” x 30” Working Area

Engrave your dream creations with our 70W CO2 Laser Engraving Machine. This laser engraving machine has an LCD display, autofocus, electric lift workbed, red dot laser, and air assist.
Financing is not available for pre-owned units Condition: Functional: This machine has been previously owned, returned to the Anaheim headquarters, and repaired and tested by OMTech Specialists. The device may have some signs of cosmetic wear and/or structural damage, but is fully operational and functions 100% as intended. Good: This machine has been previously used, returned to the Anaheim headquarters, and repaired and tested by OMTech Specialists. The device may have some cosmetic wear and/or signs of use but is fully operational and functions 100% as intended. Great: This machine has been previously used, returned to the Anaheim headquarters, and repaired and tested by OMTech Specialists. The device has minimal signs of use but is fully operational and functions 100% as intended. PLEASE NOTE: The images shown in this listing do not fully represent the cosmetic condition of the machine. OMTech Certified: This machine has undergone a thorough QA inspection by an OMTech Specialist, and each component has been repaired and tested for full operational performance. Photo Guide: View condition examples of previous Pre-Owned models: Click Here Safe Shipping: This unit is carefully secured to a reinforced pallet and protected with several layers of bubble wrap for a dependable delivery.   Features: Digital Controller The intuitive control panel with a digital display allows complete control of the laser head, pausing and stopping projects, adjusting laser power and speed settings, file viewing, and project framing via Windows-compatible RDWorks v8. Four-Way Pass-Through The four-way pass—34⅞″×3⅞″ front & back and 17⅝″×¾″ on either side—allows you to feed material into the workbed from any direction, letting you cut materials larger than the bed size by sliding them across the engraving table. Honeycomb and Knife Beds This engraver includes 2 workbeds—one honeycomb and one aluminum blade—for handling projects large and small with maximal safety and efficiency. High-Performance DC Tube Our 1000 mm CO₂ laser tube provides 70W of power for up to 2000 hours or lasts twice as long when consistently used at lower settings. Integrated Autofocus The laser head is equipped with an automatic focus adjustment that you can use directly from the control panel, eliminating tedious manual adjustment. Easy Hookup One USB port reads flash drives while the other connects directly to your PC via dedicated cable. The Ethernet port allows you to work remotely online. Linear Rail Guiding System Equipped with X and Y stepper motors for efficient power transmission between the guide rails with high precision and long service life. Red Dot Guidance A red dot pointer mounted on the laser head quickly indicates engraving points, marks the machine’s path, and identifies positioning sizes, allowing an effortless project setup process. Adjustable Laser Nozzle The laser nozzle can extend downwards up to 1.75” or be fully retracted, allowing more control over different focal distance setups. Built-in Air Assist A pre-installed air compressor guides a pressurized air stream through the laser head nozzle to displace debris, heat, and combustible gases from the engraving surface and laser beam path, keeping your workbed cleaner and engravings more precise. Spacious Work Area The 16″ × 30″ (400×750 mm) workbed gives you plenty of space to work on wood, rubber, plastic, paper, fabric, leather, ceramics, tile, fiberglass, marble, stone, and more—even before you open the integrated pass-through doors that permit you to work on even larger pieces! Water Cooling System Pre-installed hoses along with the included water pump allow for a fast and easy setup. Only use with distilled water, ensuring it stays between 60–70°F (16–21°C). Water Flow Sensor A pressure flow sensor monitors water flow throughout the laser engraving process and prevents the laser from firing if water stops circulating through the laser tube. Digital Laser Power Supply A crystal-clear LCD display provides real-time information about the device's electric current and autocorrects faults, reducing damage to your laser tube and power supply in the rare case of improper ammeter connections. Safe Observation The transparent acrylic window's sepia filter allows you to observe your engraver in action, as the tint blocks the laser beam and protects your eyes. Cover Protection The laser automatically stops engraving, cutting, or marking when the workbed's cover is opened for your safety. Close the cover and press Start to resume your work. Emergency Stop The E-Stop safety button immediately stops the machine in case of emergency. High-Precision Laser Head The industrial-grade laser head delivers a stable laser beam over the long service life of the machine, while the red-dot locator helps to quickly indicate engraving points and marks the engraving path, allowing effortless setup and operation.   Specification MPN: AF1630-70E Model: SH-G470 Input Power: 110V/60Hz AC Processing Area: 16×30 in. (400×750 mm) Max. Engraving Depth: 0.28 in. (7 mm) Workbed Adjustment: Electric Workbed Height Range: 9 in. (230 mm) Front/Back Pass Size 34.88×3.94 in. (886×95 mm) Side/Side Pass Size: 17.72×0.75 in. (450×19 mm) Max. Engraving Speed: 23.6 ips (600 mm/s) Max. Cutting Speed: 15.7 ips (400 mm/s) Included Software: RDWorks 8, CorelLaser Graphic Operating Modes: Optimized Raster, Vector, and Combined Transfer Interface: Flash Drive, USB Cord, Ethernet Cord Net Weight: 251.3 lb. (114 kg) Machine Dimensions: 49.2×30.3×26.4 in. (125×77×67 cm) Laser Tube Specs     Rated Power: 70W Laser Tube Model: OMTech 70W Laser Wavelength: 10.6 μm Laser Tube Diameter: 2.2 in. (55 mm) Laser Tube Length: 39.4 in. (1000 mm) Laser Tube Warranty: 6 Months Exp. Service Life at <40% / 40–70% / >70% Power: 1700–2000 / 1300–1500 / 800–1000 hr. Lens & Mirror Specs Focal Lens Diameter: 18 mm Focal Length: 2 in. (50.8 mm) Mirror Diameters: 25 mm   Package Includes 1 x Laser Engraver Machine 1 x Water Pump 1 x Storage Tank 1 x Ethernet to Ethernet Cable 1 x Grounding Wire 1 x Venting Exhaust Duct (4 ft. max. length) 2 x Water Hoses 1 x USB Type-A to Type-A Cable 1 x USB Drive with Software 1 x Stainless Steel Clamp 10 x Hex Wrenches 1 x Double-sided Tape 1 x Power Cord 1 x Accessory Bag 2 x Keys 1 x Silicone Sealant 1 x Instruction Manual Warranty: Great: 1-year warranty on machine parts and hardware, 3-month warranty on laser tubes and power supplies Good: 6-month warranty on machine parts and hardware, 3-month warranty on laser tubes and power supplies Functional: 3-month warranty on machine parts and hardware, 1-month warranty on laser tubes and power supplies Certifications: FDA Compliant CE Certification ISO9001 Quality Certification One 45-minute Virtual Tech Support appointment with OMTech Specialists in Anaheim, California Compatible Materials: Laser Cutting: Acrylic *Wood Leather Plastics Fabrics MDF Cardboard Paper Corian Foam Fiberglass Rubber Marking/Engraving: Acrylic Wood  Leather Plastics Fabrics Glass Rubber Cork Brick Granite Marble Tile River Rock Bone Melamine Phenolic *Aluminum *Stainless Steel *Titanium *Cannot cut hardwoods like mahogany *CO2 lasers only mark bare metals when anodized or treated. Contact us with questions on specific materials not listed, we can process a sample for confirmation. Some PVC-based acrylics can create toxic fumes when lasered.

70W CO2 Laser Engraver - Pay as Low as $85/mo. - OMTech – OMTech Laser

Parameter---Peak Power:117W;Agreement Laser Power:110W；Engraving Area: 900*600mm; Max. Engraving Speed:0-60000mm/min. Max. Cutting Speed

US Stock 130W Co2 Laser Cutter Co2 Laser Cutter and Engraver Machine with Red-Light Pointer, Auto-Focus 35-7/16''×23-5/8'' Slat,Honeycomb

130W CO2 Dual Laser Engraver Cutting Machine with 35” x 51

70W CO2 Laser Engraver Cutting Machine with 16” x 30” Working Area

OMTech: The Best Glowforge Alternative – OMTech Laser

Kehuilaser 35 ⁷/16 x 23 ⁵/8 Inches 100W CO2 Laser Engraver and Cutter Machines Auto Focus with Ruida DSP RDWorks V8 Compatible with Lightburn Software

130W CO2 Dual Laser Engraver - Pay as Low as $238/mo. - OMTech

OMTech 70W CO2 laser Engraving Cutting Engraver Cutter Autofocus

SKU: USB-130D-US, Warning! This Machine will not work properly without the Water Chiller. , Important Resources and downloads:, Visit this machine in

ZF3551-130 - 130W CO2 Dual Laser Engraver Cutting Machine with 35'' x 51'' Workbed with Dual Laser Tubes and Laser Heads

70W CO2 Laser Engraver Cutting Machine with 16” x 30” Working Area

OMTech: The Best Glowforge Alternative – OMTech Laser

Autofocus 60W CO2 Laser Engraver and Cutter with