Marking knife with finger indents Narex, carpentry knife
Detailed Description Handle: polished rosewood scales fixed by brass pins Blade: stainless steel, hardness 57 HRc Use: Essential tool for creating marks on wood when laying out precision joinery or transferring measurements. Flat handle profile prevents the knife from rolling off the bench. Code of goods Total Length (
Detailed Description
Handle: polished rosewood scales fixed by brass pins
Blade: stainless steel, hardness 57 HRc
| Code of goods | Total Length (mm) | Thickness | ||
|---|---|---|---|---|
| 822351 | 160 | 2,5 | ||
| 822352 | 160 | 1,2 | ||
| 822353 | 160 | 0,75 |
Detailed Description Handle: polished rosewood scales fixed by brass pins Blade: stainless steel, hardness 57 HRc Use: Essential tool for creating marks on wood when laying out precision joinery or transferring measurements. Flat handle profile prevents the knife from rolling off the bench. Code of goods Total Length (mm) Thickness 822351 160 2,5 822352 160 1,2 822353 160 0,75
This is a left hand marking knife made by Narex Tools of the Czech Republic. This knife will draw a much finer line on wood than an awl or pencil. It is beveled on one side only to keep the cut absolutely tight to your rule or square. Defines an exact line for starting a chisel or saw blade. Designed to draw a line on the left side of a rule. Made from super hard tempered and hardened high speed steel. Will take and hold an excellent edge.
Narex Right Hand Marking Notching Violin Knife (813701)
Made a Marking Knife - Ebony scales with brass liners and pins : r/ woodworking
Kobalt 4-Tool Brushless Power Tool Combo Kit With Soft Case, 42% OFF
Mikov Dual Bevel Marking Knife 0.100 Thick Blade with Finger Indents Rosewood Handle
Hunting knife, camp knife Antiterror STRYI – Wood carving tools STRYI
Marking/carving knife is manufactured by small and highly respected tool maker in Czech Republic. Blade made from highly allowed Cr-Mn steel and heat treated to HRc 58 Blade is .090 thick and .380 wide Single bevel sharpened ground at 25 degrees and dual bevels sharpened at 5 degrees on each side Blade length is 2.75 long and handle is 4.125 long This carving/marking knife is made by a small and highly respected tool manufacturer in the Czech Republic and is of exceptional quality.
Narex Czech Steel Dual Bevel Carving Striking Marking Knife with Blade from Hardened Cr-Mn Steel Heat Treated to HRC 58 813800
Kobalt 4-Tool Brushless Power Tool Combo Kit With Soft Case, 42% OFF
This unhandled Dual Bevel Spear Point marking knife kit was made to our specifications by Mikov a world-class Czech knife maker. Mikov is currently
Mikov V2003014 Unhandled Thin Blade Dual Bevel Marking Knife Kit with Finger Indents 0.060 Inch Thick Blade 1/2 Inch Wide 5-7/8 Inch Long Stainless
Custom Marking Knife, Made For u/glancyswoodshop : r/woodworking
An excellent value ambidextrous spear point marking knife from Narex.The blade of the Narex marking knife is made from high carbon manganese vanadium
Narex Marking Knife
Made a Marking Knife - Ebony scales with brass liners and pins : r/ woodworking
Narex Spear Point Marking Knife
Marking knife with finger indents Narex, carpentry knife, woodworking – Wood carving tools STRYI
Narex Spear Point Marking Knife for woodworking
Kobalt 4-Tool Brushless Power Tool Combo Kit With Soft Case, 42% OFF
