Gloss Metallic Vinyl Wrap - RB Series (RB02-12) – Teckwrap USA
Gloss metallic is a car wrapping film designed for full vehicle vinyl wraps, fleet graphics, vinyl graphics, and lettering. truck, boat, and other cool car wraps.
Description
Our Gloss Metallic vinyl wrap has a smooth, high-gloss finish and is crafted from the high-grade polymeric multilayered calendared vinyl film, complete with air release channels. Gloss Metallic wrap is durable and has good conformability; it’s stretchable enough to wrap around every edge and recessed area of your vehicle with ease. Gloss Metallic also uses a safe solvent polyacrylate adhesive, easy to install and gentle on car paint.
Specifications
Conformable polymeric material with stable color pigments. Suitable for full car wrapping (or any other smooth or curved surface).
The thickness of the film: 0.16mmThe thickness of film with release liner: 0.32mm
Type of film: High grade polymeric multilayered calendared vinyl film with air release channels
Colors: Fierce red, Deep blue, Passionate purple, Passionate Purple, Acid lime, Coral peach, Caribbean blue, Amber brown, Silver chromium, Dark platinum, Ash Grey, Columbia Blue, Sea Turquoise, Cerulean Blue, Ocean Green, Deep Orange, Midnight Purple, Mexican Pink, Kelly Green, Mustard Yellow, Ruby Green
Width & Length: Standard roll size - 1.52m*18m (59.8* 708,6, 4.98ft*59ft, 1.66yd* 19,6yd)
Series: 190 series
Adhesive: Henkel solvent-based acrylic adhesive, transparent, ultra-weather-resistant, viscosity 1000~3000cps, thickness 12 μm dryRelease liner: Felix Schoeller Release Liner / 20-104-20-1,9 printed, double side PE coated Kraft. (ISO 9001, ISO 140001, OHSAS 18001)
Storing period (shelf life): 2 years if stored in +10°C to +20°C, relative humidity 50%, in original package, away from direct sunlight, clean and dry place
Avg. indoor life: 4 years when followed rules of application and usage
Avg. outdoor life: 3 years when followed rules of application and use
Application: from +17°C to +25°C, usage from -55°C to +65°C
Dimensional stability: shrinkage less than 4%
Plastification: between 27%-35%
Breaking Strength: 22.7 N/10mm (Average) Test Method: ASTM D3759/D3759M-057.4 N/10mm (Average)
Light Ageing in UV Exposure: Test Method: ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor.2:2005, Test result: 5, pass; Exposure cycle: ASTM D4329-13 cycle A, Lamp type: UVA-3408h UV at (60±2.5)°C BPT, 0.89 W/ (m2•nm)@340nm, 4h condensation at (50±2.5)°C BPT, Exposure duration: 49h
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater
Application method: Standard methods for calendered films. No overstretching. Post heating
Post-heating temperature: 110°C
Cure time: 24 hours above 10°C
Aftercare: PH neutral, Avoid wax or solvents
Directional: No
Tools: soft squeegees with buffers
Important note: The images, colors, and finishes on screen are approximate. For the real representation of the product, always check the color swatch. Rolls from the same production LOT number should be used for completing a wrap job as a slight batch to batch variation of color may occur. The film may scratch during the application or a day in and out use. The scratching of the film is not covered by the warranty.
Gloss Metallic Vinyl Wrap - RB Series (RB02-12) – Teckwrap USA
Sea Turquoise (RB16-HD) Vinyl Wrap
Gloss Metallic Vinyl Wrap - RB Series (RB13-37) + SL01-HD + SL07-HD – Teckwrap Australia Pty Ltd
Gloss Metallic Vinyl Wrap - RB Series (RB02-12) – Teckwrap USA
Deep Onyx (RB32-HD) Vinyl Wrap
Buy Gloss Vinyl Wrap, Gloss Car Wrap
Gloss Metallic Vinyl Wrap - RB Series (RB01-12) – Teckwrap Australia Pty Ltd
Gloss Metallic Vinyl Wrap - RB Series (RB02-12) – Teckwrap USA
Gloss Metallic Vinyl Wrap - RB Series (RB02-12) – Teckwrap USA
Sea Turquoise (RB16-HD) Vinyl Wrap
