Non-Silicone High Temp Paste Wax in stock

4.7

(639)

Write Review

$ 34.00

Add to Cart

Qty

In stock

Description

This High Temp Paste Wax is specifically designed to release epoxy and polyester—for application temperatures ranging from 75° to 375°. Due to its smooth consistency, this paste wax is easier to apply to the mold than other paste waxes. It
This High Temp Paste Wax is specifically designed to release epoxy and polyester—for application temperatures ranging from 75° to 375°. Due to its smooth consistency, this paste wax is easier to apply to the mold than other paste waxes. It's a fluorocarbon/wax based compound and does not contain any silicone materials, so there are no silicone contamination concerns. Fabricators can apply this wax to polyester, epoxy, steel, and aluminum molds with assurance of no silicone contamination. Special preparation is required when using on a new mold: Apply a minimum of three layers of Non-Silicone High Temp Paste Wax, each four to six hours apart. Select an area of four square feet, and rub on the creamy wax with a clean terry cloth. Before it dries, use a separate cloth to break the surface film. After waxing, buff the entire surface until the wax is clear.
Fibre Glast is a leading supplier of first quality fiberglass, carbon fiber, kevlar and composite materials. Offering the very best in fiberglass and composite materials for your next areospace, civil engineering, military or motorsports project.

Turtle Wax Super Hard Shell Car Wax - 9.5 oz

Real Milk Paint Pure Tung Oil - 8 oz

PartAll Paste #2 Paste Wax Release – brickintheyard

Paste wax by Turtle Wax. Legendary super hard shell protection lasts for up to 12 months will give your car maximum shine. Legendary super hard shell protection leaves A lasting Turtle Wax shine.

Turtle Wax 14 oz Super Hard Shell Paste Wax

This soft paste marine wax provides long-lasting protection from UV radiation, dirt, salt, and oxidation. Its non-abrasive formula is easy to apply, dries quickly, and is easy to remove.

TotalBoat Premium Boat Wax 11 oz Marine Paste Wax

Parting wax is a non-silicone green wax specially formulated to produce a tough, durable, high-gloss surface. When used with #13 PVA, Partall parting wax delivers excellent release characteristics. Special preparation is required when using on a new mold:Use a clean dry cloth or applicator pad to apply a thin even coat of Parting Wax to mold surface. If buffing by hand, apply to small section and begin buffing within one minute of application.