Pentra-Clean (CR) Cleaner Convergent Concrete Technologies, LLC

Pentra-Clean (CR) uses reactive Nano-Lithium to clean, harden, protect and restore gloss to concrete flooring. Shop now and ship nationwide, excluding California.

This product cannot be shipped to California.

Pentra-Clean™ (CR) cleans floors by cutting through dirt, grime and residue. This cleaner uses reactive Nano-Lithium to harden, protect and restore gloss and durability. Cleaning with Pentra-Clean™ (CR) increases the floor's longevity, reducing maintaince and costly repairs. This product is ideal for cleaning commercial, retail, industrial, and institutional floors.

• Easily removes dirt and other surface soils
• Reduces the need for periodic buffing or burnishing
• Helps resist scuffing, scratching, and water spots
• Amplifies overall gloss and clarity with Nano-Lithium® technology
• Leaves no residue that will dull or damage a floor or finish
• Certified by the National Floor Safety Institute (NSFI) as “High Traction” under ANSI B101.1 Wet Test

This product cannot be shipped to California.

Pentra-Clean™ (DC) Daily Cleaner easily removes stains, dirt, grease and grime from concrete, terrazzo, natural stone and tile floor surfaces. Pentra-Clean™ (DC) Daily Cleaner is easy to use and has a neutral pH with no ammonia, alcohol or acid.

• Easily removes dirt and other surface soils
• Leaves no residue that will dull or damage a floor or finish
• Neutral pH cleaner

Servcide-10 is a broad spectrum, one-step, hard surface cleaner, deodorizer, disinfectant, food contact sanitizer and virucide. When used as directed, this product will deliver effective biocidal action against bacteria and viruses. Peak biocidal performance is attained when this product is properly diluted 1.5 oz. per gallon of water (or equivalent use dilution) (1150 ppm active). Servcide-10 can be used to sanitize food contact surfaces such as countertops, glasses and utensils as well as to disinfect a wide range of non-porous hard surfaces such as floors, walls and countertops. Servcide-10 meets EPA’s criteria for use against SARS-CoV-2, the virus that causes COVID-19 in the presence of 400 ppm hard water and 5% soil.

• Meets EPA's criteria for use against COVID-19
• EPA Registered
• General Disinfectant
• Hospital or Medical Environment Disinfectant
• Food Contact Sanitizer
• General Cleaner and or Deodorizer 
• 1 Gallon makes up to 85 Gallons of Disinfectant

IMPORTANT: This product is currently unavailable for shipping to California and Connecticut. If you place an order in one of these states, your order will be cancelled. Sorry for the inconvenience.  

*Designed for professional use only

Pentra-Paint™ (LM) is a lithium-based, industrial-use traffic and lane marker paint for concrete, asphalt, terrazzo, stone and masonry surfaces. It dries quickly and protects against abrasion, dust, stains and overall deterioration. Pentra-Paint™ is ideal for factory floors, parking lots and airport runways. The paint can be re-coated, and easily cleans up with soap and water. It is eco-friendly, VOC compliant, and outperforms epoxies, urethanes and acrylics when it comes to durability, adhesion and longevity.

• Out-performs epoxies, urethanes and acrylics in durability, adhesion, and longevity
• Abrasion and stain resistant
• Breathable, allowing vapor transmission.
• Low tensile strength-does not peel back and curl when damaged
• Easily repairable- just sand and reapply
• Glass beads can be added for making reflective markings
• Will not peel, flake or delaminate
• Dries extremely quickly, low odor
• VOC compliant, may contribute to LEED points (IEQ credit)

Please allow 1 business day for us to prepare your order before shipping. 

*Designed for professional use only

Pentra-Guard® (EXT) is an eco-friendly, exterior sealer for concrete, masonry and stone surfaces. It seals and protects against dirt, grime, salt and oil damage while enhancing the natural color and shine. This treatment creates a breathable, protective clear coat that is abrasion resistant and will not flake or peel. Pentra-Guard® (EXT) cures quickly and provides a hard, glossy, wet look finish to any exterior cementitious surface. This lithium-based solution is VOC compliant and easy to apply.

• Enhances the color of concrete, masonry, and stone surfaces
• Provides premium “wet look” finish
• Adds durability and protection
• Rapidly cures with little-to-no-downtime
• Forms a protective microfilm that is breathable and will not peel or flake
• Can be reapplied or recoated without stripping
• Functions as anti-graffiti and stain protection for vertical and horizontal surfaces
• Reduces maintenance and cleaning costs
• VOC compliant, may contribute to LEED points (IEQ credit)

*Designed for professional use only 

COLORFAST™ FINISH is a high performance finish that enhances the appearance and extends the longevity of polished, integrally colored, dyed, and stained concrete, adding shine, stain resistance and abrasion resistance. Effective on concrete and cementitious surfaces that are “stained” or “coated”, this water-based, lithium-fortified product dries quickly to a clear, extremely hard micro-coating that bonds with and protects the substrate. Because of its unique chemistry, COLORFAST™ FINISH will not lift or peel from the surface, and periodic re-coating requires no stripping. This product extends the longevity of the surface and eliminates the need for waxes, polishes and acrylics. COLORFAST™ FINISH is non-toxic, non-hazardous, and VOC compliant in all areas of the world.

• Enhances appearance of colored floors and prolongs/protects color quality
• Out-performs floor waxes, polishes and acrylics
• Delivers rapid gloss with increased abrasion and stain resistance
• Keeps dirt and contaminants from penetrating
• User friendly, dries in minutes with low odor
• This product will not alter the profile of a surface
• Forms a protective microfilm that is breathable, hard, and will not peel or flake
• reduces maintenance and cleaning costs
• Re-application is simple and requires no stripping
• Safe for food contact per SGS Testing (21 CFR 175.300)
• VOC compliant, may contribute to LEED points (IEQ credit)

 *Designed for professional use only

COLORFAST™GLOSS is an eco-friendly, high-solids exterior sealer for concrete, masonry and stone surfaces. It seals and protects against dirt, grime, salt and oil damage while providing a “wet look” gloss that enhances natural color and shine. This inorganic/organic hybrid Nano-Lithium® treatment creates a breathable, protective clear micro-film that is abrasion resistant and will not flake or peel. COLORFAST™ GLOSS cures quickly and provides a hard, glossy, wet look finish to any cementitious or inorganic stone surface. This low odor, non-yellowing, lithium-based solution is VOC compliant and easy to apply.

• Enhances the color of concrete, masonry, and stone surfaces
• Provides premium wet look finish
• Replaces traditional acrylic sealers, providing a more durable microfilm
• Adds breathable protection, will not peel or flake
• Rapidly cures with little-to-no-downtime
• Can be reapplied or recoated without stripping
• Functions as anti-graffiti and stain protection for vertical and horizontal surfaces
• Reduces maintenance and cleaning costs
• VOC compliant, may contribute to LEED points (IEQ credit)

*Designed for professional use only

STRiON:FORTIFY is a revolutionary new method of concrete densification and hardening. Using groundbreaking new silica-free technology, STRiON relies on an ionic transfer process to disperse deep into concrete to make it more resilient, resistant to traffic, dustproof, easy to clean and prepped for polishing. On top of that, it’s exceptionally easy to apply. It’s a safe bet to get the job done right.

• Extremely simple application, with no rinsing required
• Hardens concrete and terrazzo while preserving the surface’s natural look
• Penetrates, with no film to lift or peel off, and allows abrasive tooling to work more effectively
• May be applied in temperatures as low as 25℉
• Does not contribute to surface ASR or surface crazing
• Resists dusting, making concrete easier to maintain
• VOC compliant may contribute to LEED points (IEQ credit)

*Designed for professional use only

Pentra-Sil® (H) provides maximum hardening for concrete slabs and tilt-up construction. This lithium-based product reduces dusting and makes the surface more water, stain and abrasion resistant while increasing surface sheen over time. Pentra-Sil® (H) is applied in one application, will not peel, and no rinsing is required. This solution is VOC compliant and easy to apply.

• Easy application, no rinsing required
• Penetrates, no film to lift or peel off
• Bond-breakers can be applied directly on top for tilt-up construction applications
• Reduces efflorescence and surface sweating
• Does not contribute to surface ASR, or surface crazing
• Compatible with integrally colored concrete, stains and dyes
• Curing compounds are more easily removed with scrubbing
• Resists stains and dusting, making concrete easier to maintain
• VOC compliant, may contribute to LEED points (IEQ credit)

*Designed for professional use only

Pentra-Sil® (244+) is a high-performance lithium hardener, densifier and sealer. It is formulated to protect existing concrete against damage from salt, freeze-thaw, moisture and steel corrosion. Pentra-Sil® (244+) reduces chloride ion intrusion, dustproofs, hardens and fortifies the surface. It is easy to use and VOC compliant.

• Protects against salt and freeze/thaw damage
• Hardens, densifies and dust-proofs
• Easy-to-use, low odor, no rinsing required
• Defense against water and harmful substances
• Not susceptible to UV damage
• Breathable--allows moisture to escape without damage to the surface
• Penetrates--no film to lift or peel off
• Reduces efflorescence and surface sweating
• Does not contribute to surface ASR or promote crazing
• VOC compliant, may contribute to LEED points (IEQ credit)

*Designed for professional use only

Pentra-Sil® (IH) is specifically designed for concrete polishing. Applied during the polishing process, this penetrating hardener improves the final appearance by allowing abrasive tooling to work more effectively. Pentra-Sil® (IH) increases gloss and clarity. It is extremely easy to apply and will not skin, discolor, or leave white blemishes. This lithium-based solution is VOC compliant and easy to apply.

• Extremely simple application
• Hardens concrete and terrazzo for polishing
• Allows abrasive tooling to work more effectively
• Improves abrasion resistance and reduces dusting
• Preserves the natural look of the surface
• VOC compliant, may contribute to LEED points (IEQ credit)

*Designed for professional use only

Pentra-Sil® (HD) is a high-performance lithium densifier that provides optimal hardening to improve abrasion resistance and reduce dusting. Pentra-Sil® (HD) is best for existing concrete surfaces to increase abrasion and stain resistance and eliminate dusting. You can also use the treatment during polishing processes. This solution is VOC compliant.

• Increases abrasion resistance
• Penetrates, no film to lift or peel off
• Reduces efflorescence and surface sweating
• Does not contribute to surface ASR or promote crazing
• Prolongs finish of polished surfaces
• Resists stains and dusting, making concrete and facilities easier to maintain
• VOC compliant, may contribute to LEED points (IEQ credit)

*Designed for professional use only

Pentra-Sil® (HDS) is engineered for polished, colored, dyed or acid stained cementitious surfaces and is ideal for polishing and restoring worn and damaged flooring. This eco-friendly lithium solution hardens, densifies, and seals concrete, overlays, and terrazzo. It enhances color, increases abrasion resistance and protects against staining. Pentra-Sil® (HDS) minimizes salt damage, is easy to use, and is VOC compliant.

• High solids formula improves polishing results
• Enhances and protects dyed, stained and integrally colored concrete
• Hardens, densifies, and dust-proofs
• Easy-to-use, no rinsing required
• Defends against water, stains, and harmful substances
• Breathable–allows interior moisture to escape without damaging sealer
• Penetrates--no film to lift or peel off
• Protects against salt and freeze/thaw damage
• Reduces efflorescence and surface sweating
• Does not contribute to surface ASR or promote crazing
• VOC compliant, may contribute to LEED points (IEQ credit)

*Designed for professional use only

Pentra-Shield® is an exterior concrete and masonry surface hardener and densifier that provides freeze-thaw, scaling and spalling protection. This treatment strengthens concrete sidewalks and driveways to minimize damage caused by winter weather. Pentra-Shield® is a penetrating, breathable solution that reduces moisture absorption and leaves no surface film or discoloration. This lithium-based solution is VOC compliant and easy to apply.

• Protects against freeze-thaw cycles and de-icing chemicals
• Reduces scaling and spalling
• No surface film to peel or wear off
• Does not alter the coefficient of friction of the surface
• Will not discolor or change the substrate surface appearance
• Reduces porosity and increases strength and durability
• VOC compliant, may contribute to LEED points (IEQ credit)

*Designed for professional use only

Pentra® (PCF) is a liquid pore and micro-crack filler for concrete grinding and polishing. The reactive treatment mixes with the dust created during concrete grinding to fill pinholes, microcracks and other imperfections in the concrete surface. It cures into a durable surface that will accept colored stains, dyes and hardeners.

• Fills imperfections during grinding operations
• Provides superior gloss and reflectivity
• Accepts color-stains and hardeners more uniformly
• Helps create a polished surface that is easier to maintain
• VOC compliant, may contribute to LEED points (IEQ credit)

*Designed for professional use only

Pentra-Pel™ (SI) is a penetrating lithium stain guard designed for interior or exterior concrete, stone and masonry surfaces. This product creates a protective barrier that resists staining. It densifies, seals, and repels while maintaing breathability and doesn't alter the appearance of the substrate. Pentra-Pel™ (SI) is easy to use and is VOC compliant.

• Provides a protective barrier that resists staining
• Hardens, densifies and seals
• Creates an abrasion resistant surface
• Protects polished concrete without forming a film
• Helps prevent freeze/thaw damage
• Repels water, oil and stains
• Preserves natural look of the substrate
• Performs well on natural stone
• Breathable–allows interior moisture to escape without damaging sealer
• VOC compliant, may contribute to LEED points (IEQ credits)

Pentra-Melt™ is a fast-acting de-icer for concrete driveways, sidewalks, ramps, steps, loading docks and decks. This industrial strength formula melts ice on contact as low as -80 degrees Farenheit (-62ºC). It works to separate ice from the surface, allowing for easy removal. Pentra-Melt™ can be used before or after a storm and is non-toxic to plant and animal life. It will not damage the concrete or leave residue.

• Rapidly cuts through hard packed ice, breaking the bond at the surface
• Resists re-freezing and early dilution, preventing further ice formation and accumulation
• Fast acting, long-lasting formula results in fewer applications
• Non-toxic and non-hazardous to plant and animal life
• Easy to apply--no special spray equipment needed
• No mess--will not track or leave residue like common deicers
• Will not damage surface
• Does not corrode most metals

Pentra-Cure (MH) Convergent Concrete Technologies

is a concrete cleaner that removes stains from concrete, stone and tile floor surfaces. Learn more about this formula from Convergent.

Pentra-Clean (DC)

Pentra-Clean (CR) Cleaner Convergent Concrete Technologies, LLC

PENTRA-CLEAN (DC), On Slab Products

Concrete hardener - Convergent Group SA - Premium soil product

Application video, Great job result 👍 for our SPANISH dealer ! Work of Application and Finishing of Pentra™- Protective Stain (PPS/HG) Silver Grey with Pentra-Finish® (HG)., By Convergent Group SA

Cleaning and Maintenance Convergent Concrete Technologies

Cleaning and Maintenance Convergent Concrete Technologies

Pentra-Clean (CR) Cleaner Convergent Concrete Technologies, LLC

Polished Concrete Convergent Concrete Technologies

Concrete hardener - Convergent Group SA - Premium soil product