High Performance Epoxy Resin and Fumed Silica Thickening Agent and

Get Both the 1.5 gallon kit of High-Performance Crafters Coating Epoxy AND the 1 gallon of Crafters Fumed Silica and a 2oz bottle of Red, White, and Blue Liquid Pigments.  The High-Performance Epoxy Resin is UV Protected with hindered amine light stabilizers that slow the epoxy resin degradation from UV light AND the C

Get Both the 1.5 gallon kit of High-Performance Crafters Coating Epoxy AND the 1 gallon of Crafters Fumed Silica and a 2oz bottle of Red, White, and Blue Liquid Pigments. 

The High-Performance Epoxy Resin is UV Protected with hindered amine light stabilizers that slow the epoxy resin degradation from UV light AND the Crafters Fumed Silica is a 1 Gallon Kit.

This high-performance epoxy resin started as an epoxy resin used for boat restoration and evolved into a high-performance epoxy resin capable of withstanding chemicals, acids, corrosion, rust, wind, salts, and of course, water. 

Commonly used for the following types of Applications:    

• Outdoor tables
• corrosion-resistant coatings
• Boat repair and restorations
  
• Tank Linings
• Industrial coatings and flooring
  
• Garage Floor coatings
• Weatherproofing
• Surfboard and Paddleboard repairs
• High Performance 

This formula cures much faster than the typical epoxy resin. A fresh pour can be tack free within 2 hours. We still recommend not touching the pour for 7-10 days to ensure full adhesion. 

Advantages:

• low viscosity (800cps.)
• extra long pot-life of 60 minutes.
• faster cure times of 24 hours.
• 0% VOC's and virtually no smell
  
• Tensile Strength, 7500 PSI before cracking

We include part A (resin) and part B (hardener) and instructions with the kit. 

Crafters Fumed Silica Thickening Agent is commonly used to thicken epoxy resin,  paints, and similar liquids.

A trade name commonly used is Cabosil Fumed Silica. This jug contains approximately 1 gallon of the Fumed Silica powder. Simply add it to the epoxy resin, paints, or liquids and stir by hand until you reach the desired thickness. 

Commonly used when repairing cracks with epoxy resin. 

• Low density
• Extremely high surface area
• Three-dimensional particle structure
• Increases viscous properties of liquids
• Non-sagging properties

Perfect for patching holes, filling seams & cracks, filling voids, and thickening liquids in the high-performance boating industry. Also found to be used to assist to create custom projects, scenes, and set designs. 

Once cured it can be fully machined and sanded after 24 hours.   

1 Gallon jug with easy on and easy off screw-on lid. 

AND

Three liquid concentrated epoxy resin liquid pigments.

These liquid pigments will turn any epoxy resin red, white, blue or into a mix if you mix the colors. 

Tired of using powders or tints?

This will turn the epoxy resin to your desired color. This is NOT like a tint that runs or fades in large amounts of epoxy resin.

Keep pigment-to-resin ratio below 5% or you may experience improper curing.

2-ounce bottles of each color shown is included. Red, White, and Blue. 

This concentrated pigment makes life real easy by simply stirring directly into your resin.

Aerosil R 202 Fumed Silica Thickening Agent, 22lb

The Use of Engineered Silica to Enhance Coatings — American Coatings Association

Liquid Resin Various Design

Fumed Silica Application In Resin - HIFULL Corporation

Slow epoxy kit 105/206B. For longer curing time.

CAB-O-SIL® TS-720 - Cabot Corporation

What We Manufacture Score High Gunsmithing

Excellent Thixotropic Agent: Extremely fine powder used to thicken virtually every liquid material. Helps create a strong adhesive with a smooth

Crafters Fumed Silica Thickening Agent for Epoxy Resin, Silicone, Paint, Varnish, and Liquid - 1 Gallon - Lightweight Filler Thickener Powder Fills

DIY Fairing and Filling - Practical Sailor

Waterproof: The white powder super strength thickener is waterproof and can be used in water-based adhesives, sealants, and coatings. Versatile: The

LXC FUMED SILICA white powder super strength thickener, 1 Gallon for epoxy, polyester, fiberglass resin, adhesive, paint systems, thickening agent

Cabosil Fumed Silica Thickener

Effective Approach to Tackle Deteriorating Sag Performance of High-Build Epoxy Glass Flake Coatings, 2018-03-07

System Three silica thickener is an extremely fine powder used to create a very smooth, non-sagging, high strength mixture. This material is also referred to as colloidal or fumed silica, and is an excellent thixotropic agent which is used to control the viscosity of mixed epoxy systems. Silica can be used alone for a very smooth, non-sagging, high strength mixture or combined with fillers or fibers to make them non-sagging.

System Three 3105S47 White Silica Thickener, 5 Quart Tub

Hydrophobic Fumed Silica l SiSiB SILICONES