Poly 74-45 is a 1A:1B mix, A~30 hardness, polyurethane liquid rubber that cures in 16-24 hours and is designed for making high-performance rubber molds for casting materials such as plaster (millwork, home décor, etc.), cast stone, wax (candles & lost wax varieties), concrete and resins (polyurethane, polyester, ep
High quality molding, casting and special FX supplies for film and television. Sculpting clays and metal finishing supplies. Makeup Supply,
Poly 74-45 is a 1A:1B mix, A~30 hardness, polyurethane liquid rubber that cures in 16-24 hours and is designed for making high-performance rubber molds for casting materials such as plaster (millwork, home décor, etc.), cast stone, wax (candles & lost wax varieties), concrete and resins (polyurethane, polyester, epoxy - with proper release agents). Poly 74-45 molds can be poured as supplied or brushed-on by mixing in Poly Fiber II thickener or fumed silica. Poly 74-45 liquid rubber is an excellent multi-purpose, economical mold material that will provide long mold life, durability and consistent performance under repeated casting. Used extensively by art foundries and cast stone producers. When brushing, 74/75 Part X accelerator can be used to speed the process.
For professional use only. Use in a well ventilated area.
WARNING: This product can expose you to chemicals including Toluene diisocyanate (TDI), which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Polyurethane liquid casting rubber Shore A 30 (Poly 74-30
Expressions LTD Polytek Poly 74-45 Polyurethane Liquid Mold Rubber
Poly 74-45 Liquid Rubber
Poly 74-45 -Polyurethane rubber for molds
Poly 75-70 - All Kit Sizes – brickintheyard
PolyTek 74-45 Pourable Polyurethane Mold Rubber, Poly 74-45 is a very tough, high tear, high elongation rubber. This product is ideal for high volume
Poly 74-45 Mold Rubber
Poly 75-70 - All Kit Sizes – brickintheyard
PolyPig is a concentrated pigment for use in all of our Polyurethane Casting Resins, Polyurethane Foams, and Polyurethane Elastomer (rubber) formulas.
POLYPIG POLYURETHANE PIGMENT FOR RESINS & POLY RUBBERS
Poly 74-45 -Polyurethane rubber for molds
Poly 74-45 liquid polyurethane rubber cures to a very tough, high-tear, high-elongation rubber. This product is ideal for high volume concrete and
POLYTEK 74-45
Polyurethane Rubbers
Expressions LTD Polytek Poly 74-45 Polyurethane Liquid Mold Rubber
Poly 74-45 is a 1A:1B mix, A~30 hardness, polyurethane liquid rubber that cures in 16-24 hours and is designed for making high-performance rubber
Poly 74-45 Polyurethane Rubber - All Sizes
Did you have a spill? Did you mix some 74-30 off ratio? Humidity demons got to the 74 A before you did? Extra part A only for 74 series Polyurethane
Poly 74 Series Part A 40 lbs (5 Gal. Pail)
Poly 74-20 Liquid Rubber Polytek Development Corp.