Protak Wood Adhesive – Chemique Adhesives

4.9

(449)

Write Review

$ 1.50

Add to Cart

Qty

In stock

Description

Protak 603 wood adhesive is a one component polyvinyl acetate D3 conformance adhesive used for bonding wood and wood-based materials. It has high creep resistance, high heat resistance and a fast setting time, ideal for timber work, all joinery applications, furniture assembly and more!
Protak 603 Wood Adhesive Superior quality, fast setting D3 rated PVA wood adhesive. Protak 603 wood adhesive is a one component polyvinyl acetate D3 conformance adhesive used for bonding wood and wood-based materials. Protak 603 is characterized by a high creep resistance, high heat resistance and a fast setting time. PVA adhesives are the ideal choice for timber work, offering a high bond strength that lasts! For quick and easy application, spread adhesive uniformly across surfaces to be bonded, using a brush, a spreader or mechanical roller or by hand. Applications Protak PVA adhesive can be used for all woodworking applications that require enhanced water resistance. It's clear drying formula makes in the perfect choice for high quality joinery, doors, windows, stairs and more! Protak wood glue can also be used for furniture assembly and bonding high pressure laminates and timber veneers. ✔ High quality PVA wood to D3 specification ✔ Bonding of windows and doors and all joinery applications ✔ Suitable for hot or cold pressing ✔ Hard and exotic timber pressing ✔ Water resistant ✔ Dries clear ✔ Clean up with water ✔ 45% solids ✔ Can be applied by hand or mechanical roller Protak Wood Adhesive Technical Data Chemical Base: Polyvinyl Acetate Color: White Viscosity: 10000 - 15000 cps @ 68°F Solids: 43 - 45% pH: 2 - 4 Packaging: 1100kg IBC, 25kg container and 5kg container Storage Life: 12 months in unopened container Storage Temperature: 50°F to 77°F Water Resistance: D3 compliant Technical Data Sheet Safety Data Sheet Protak Wood Adhesive Application Data Adhesive Drying Time: Approximately 3-10 mins dependent on coating weight of adhesive, porosity and moisture content of substrates Application Method: Use a roller, brush or spreader and apply to woods Application & Substrate Temperature: 64 °F to 68 °F Moisture Content of Wood: 8 - 10% Substrate Preparation: All surfaces should be free of contamination by dust, grease, oils or release agents. Substrates should be checked for contamination by mould release or cutting agents. Metals should be degreased prior to bonding. Cleaning solutions, if used, must be allowed to evaporate before application of the adhesive.
Twin Cartridge Adhesive Application Gun Cartridge capacity of 50ml (1.7oz) Chemique’s twin cartridge adhesive applicator gun is ideal for bonding, shimming, and sealing applications where users require a 1:1 mixture adhesive in 50ml twin cartridges. This manual adhesive applicator gun provides all day comfort, efficient dispensing, loads cartridges easily, and offers durable and dependable performance that you can count on. Solfre 2466 and Solfre 2604 polyurethane adhesives are ideally suited for use with the twin cartridge applicator glue gun, as well as any 50ml two-part twin cartridge adhesives such as the Massetak two-part epoxy and products from the Axil methacrylate range. Twin Cartridge Gun Technical Data Packaging: 1x 50ml twin cartridge adhesive applicator gun Color: May vary Cartridge Capacity: 50ml (1.7oz) Cartridge Ratio: 1:1 Follow the link to watch our helpful videos on caulking guns: How to use a cartridge glue gun