Mylar Sheets for Stencils Stencil Blanks & Plastic Sheets
Tough, flexible food greade film, great for making stencils and many uses. Carried in 4 mil, 7 mil, 10 mil and 14 mil thicknesses and multiple sizes.
Stencil Ease has the largest range of stencil materials for those people who want to cut their own. We carry a large range of sizes and carry almost any material that works well for stencils. We carry a range of sizes and for most materials, we have roll stock up to 6 ft wide so that we can pro
The is a premium material for making stencils with electric cutters.
this material is made of 5 mil mylar which is tough and flexible, Great for many stenciling needs. Unlike chepaer products the backer is made from plastic so that it always lays flat and does not curl liek the paper backers.
Finally, this has a low tack adhesive which is effective, can be used many times, and will not leave any residue on the painted surface like most adhesive backed materials,
1. The 5 mil stencil sheet is reliably cut by all electric cutters. 2. The paper backing makes the stencil easy to apply. 3. No tedious clean up of those tiny cut pieces on the cutting mat. They all stay on the backer. The machine is immediately ready to reload and move on to the next job.
The mylar is easy to cut both manually with a gyro-Cut tool, and Xacto style knife, as well as any electric cutter. Additionally the mylar already has a low tack adhesive that will hold the stencil wherever it is to be applied and can be picked up and reapplied multiple times. It will even stick on the ceiling.
This material is excellent stencil material and great for decorating paper, wall, fabric, face painting and many other projects.
Available in 12 inch x 12 inch or 12 inch x 17.5 inch sheets, You can cut a smaller, more intricate design, or scale it up for a larger image or pattern by taping your sheets together to cover more surface area. We also sell this material by the foot off of rolls with widths of 18, 27, 36, and 51 inches.
Great for arts and crafts, custom lettering, signs, designs, and more. Make sure your stencil is cut with adequate bracing, and leave room on the edges for excess paint. Easy to clean? You bet. Just add a little soap and water or paint remover to the stencil material and watch as the paint comes right off.
This light mylar will make your life so easy, you’ll feel like you’re not even trying. The adhesive backing will allow you to stick the stencil on any surface for use. The adhesive will last for many uses and will not pull paint of any wall in good repair. When the tack is eventually lost you can reactivate it by cleaning it with a damp, lint-free cloth.
Our 1/16th inch(60 mil) and 1/8th inch(125mil) LLDPE sheets are a tough flexible,translucent, non-stretchy material which make great stencils and can have many uses. it has a slick surface and my son takes hockey shots from it. It can be used as a shelf liner for warehouses. Can be used to protect walls from water and abrasion damage.
This is fantastic stencil material. It cuts easily with a jig saw or a router, you can cut the 1/16th in with a knife but not easily. Once made into a stencil it is super durable, easy to clean and will last hundreds of uses.
Best cutting technique is to place the stencil over the old stencil or marking that you would like to copy. The material is clear enough that you can trace with a permanent marker. Then cut out.
Our 6-mil blank mylar material is the great choice for a DIY stencil. This the best stencil material for Cricut Cutters. This material is both easy to cut yourself and still durable enough to make a great stencil.
- Available in 12 inch x 12 inch or 12 inch x 17.5 inch sheets,
How To Cut: our 6 mil material cuts easily with a scalpel knives. We recommend our Gyro-cutter. It is the best material for electric cutters like a Cricut, Silhouette or similar products. (Thicker material is not consistently cut by this type of cutter.) It is easy to cut and transparent enough so that it is easy to trace cut from a picture under the material. From interior decorating to logos and crests, to face painting, to small industrial projects, it’s as easy as drawing your design on, cutting, and painting on any surface you like!
This mylar is a hazy material specifically engineered for easy cutting with a pen or exacto knife. With a material this thin, any design you come up with will produce crisp lines that pop right out off of your surface. We recommend brushing or rolling your paint on with this material for optimum line definition.
Great for arts and crafts, custom lettering, signs, designs, and more. Make sure your stencil is cut with adequate bracing, and leave room on the edges for excess paint. Easy to clean? You bet. Just add a little soap and water or paint remover to the stencil material and watch as the paint comes right off.
This light mylar will make your life so easy, you’ll feel like you’re not even trying. When you’re finished cutting, stick your stencil on with our adhesive spray (sold separately) for easy management - this will both make the process easier for you and produce a cleaner paint job.
Crystal Clear polyester sheet. Great for presentation covers. protective covers. Creating visually clear air barriers, crafting. etc. Cuts easily with a sharp knife and works great wtih Cricut style cutters but very tough otherwise.
Price is for a 50 inch wide sheet cut for length by the foot.
Our 7-mil crystal clear mylar material has many uses it is great for as a protective cover for artwork and other images. Can be cut with commercial cutters. This material is both easy to cut yourself and still durable enough to make a great stencil.
- Available in 12 inch x 12 inch or 12 inch x 17 inch sheets,
How To Cut: our 5 mil Clear material cuts easily with scalpel knives. We recommend our Gyro-cut PRO. It is easy to cut and it is easy to trace cut from a picture under the material. From interior decorating to logos and crests, to face painting, to small industrial projects, it’s as easy as drawing your design on, cutting, and painting on any surface you like!
This mylar is a crystal clear material specifically engineered for easy cutting with a pen or Exacto knife. With material this thin, any design you come up with will produce crisp lines that pop right out off of your surface. We recommend brushing or rolling your paint on with this material for optimum line definition.
Great for arts and crafts, custom lettering, signs, designs, and more.. Just add a little soap and water or paint remover to the stencil material and watch as the paint comes right off.
The is a premium material for making stencils with electric cutters.
this material is made of 7.5 mil mylar which is tough and flexible, Great for many stenciling needs. Unlike cheaper products the backer is made from plastic so that it always lays flat and does not curl like the paper backers.
Finally, this has a low tack adhesive which is effective, can be used many times, and will not leave any residue on the painted surface like most adhesive-backed materials,
1. The 7.5 mil stencil sheet is reliably cut by all electric cutters. 2. The paper backing makes the stencil easy to apply. 3. No tedious cleanup of those tiny cut pieces on the cutting mat. They all stay on the backer. The machine is immediately ready to reload and move on to the next job.
The mylar is easy to cut both manually with a gyro-Cut tool, and X-acto style knife, as well as any electric cutter. Additionally, the mylar already has a low-tack adhesive that will hold the stencil wherever it is to be applied and can be picked up and reapplied multiple times. It will even stick to the ceiling.
This material is excellent stencil material and great for decorating paper, wall, fabric, face painting, and many other projects.
Available in 12 inch x 12 inch or 12 inch x 17.5 inch sheets, You can cut a smaller, more intricate design, or scale it up for a larger image or pattern by taping your sheets together to cover more surface area. We also sell this material by the foot off of rolls with widths of 18, 27, 36, and 51 inches.
Great for arts and crafts, custom lettering, signs, designs, and more. Make sure your stencil is cut with adequate bracing, and leave room on the edges for excess paint. Easy to clean? You bet. Just add a little soap and water or paint remover to the stencil material and watch as the paint comes right off.
This light mylar will make your life so easy, you’ll feel like you’re not even trying. The adhesive backing will allow you to stick the stencil on any surface for use. The adhesive will last for many uses and will not pull paint of any wall in good repair. When the tack is eventually lost you can reactivate it by cleaning it with a damp, lint-free cloth.
10 mil 12x12inch PET Blank Mylar Stencil Sheets China Manufacturer
16pcs 10mil Blank Mylar Stencil Sheets 12X12 Inch Milky PET Blank
BANLTRE 12 Pieces 6 mil Blank Template Material Stencils Mylar for
12 x 18 white 10 MIL stencil material (25 sheets)
Use these Hello Hobby Stencil Blanks to create your own designs for stenciling. The sheets are .18mm thick so they can be cut with many of the cutting machines on the market or with an craft blade by hand. Once cut, position and use tape to hold stencils in place. Apply paint sparingly with a stencil brush or foam dauber sponge. Remove carefully and allow to dry. For easy clean up, wash the paint off the stencil with mild soap and water while its still wet so you can reuse it.
Hello Hobby Blank Reusable Plastic Stencils, Create Your Own Designs, Blank, 4 Sheets, .18mm Thick, 7 x 10
25 Pieces 4 mil Blank Stencil Material Mylar Template Sheets for
Blank Mylar Stencils Sheets for Wall Painting China Manufacturer
12pcs 3D Blank Stencil Template Stencil Sheets PVC Material Transparent Stencils for Silhouette Machines
Our premium food grade Blank Mylar (also called blank stencil film) cut directly from the roll to your required length. Widths may vary due to
10 mil Blank Mylar Sold by the Foot 12
Sheets Stencil Blank Template Mylar Making Material Clear Pet
