THE BATH TIME - The largest collection of Bath Bomb Molds Online – The Bath Time
HOW IT WORKS? · The largest online shop of bath bomb molds in the world. · We have various design and prices for everyone, choose the ones you love.
Our Pixel Heart Bath Bomb Mold is printed using 3D printing technology. The sandwich-type mold makes it easy to press adorable Pixel Heart bath bombs quickly and easily!
All mold designs are tested with different bath bomb recipes before being listed, and each mold is inspected before shipping it out.
SPECS:
Pixel Heart Bottom Piece
Pixel Heart Top piece
Pixel Heart Bath Bomb Cylinder
Available sizes: 2 | 2.5 | 3 | 3.5 | 4 | 4.5
HOW TO USE:
–Place the cylinder on a surface and slide the bottom half of the mold in.
–Fill to the top of the outer ring with your bath bomb mixture, don’t pack it in.
–Then press the top half of the mold into the outer ring.
–Push the top mold on and press it down.
–Move the cylinder up and down and slide it out.
–Tap lightly around the mold and slowly pull off the top half and then the bottom half and
–lay the bath bombs out to dry for 24 hours before packaging.
–This three-piece press allows you to shape a perfect Devil with whichever size “Saturn ring” you prefer.
WARM NOTE:
I use top-grade PLA PRO+ for our molds. I take the pro over the regular one WITHOUT additional charges so you can enjoy the best quality molds. Colors vary based on our filament supply and choice, though we generally use black. All mold designs are tested with different bath bomb recipes before being listed, and each mold is inspected before shipping it out.
CARE INSTRUCTIONS
The PLA is heat-sensitive. So all cleaning must be done using cold water, and never in the dishwasher. Store the molds indoors and never in a hot shed or car as it can cause the molds to warp. In addition, make sure not to soak them as the molds can hold water between the PLA fibers.
Our Love Potion Bath Bomb Mold is printed using 3D printing technology. The sandwich-type mold makes it easy to press adorable Love Potion bath bombs quickly and easily!
All mold designs are tested with different bath bomb recipes before being listed, and each mold is inspected before shipping it out.
SPECS:
Love Potion Bottom Piece
Love Potion Top piece
Love Potion Bath Bomb Cylinder
Available sizes: 2 | 2.5 | 3 | 3.5 | 4 | 4.5
HOW TO USE:
–Place the cylinder on a surface and slide the bottom half of the mold in.
–Fill to the top of the outer ring with your bath bomb mixture, don’t pack it in.
–Then press the top half of the mold into the outer ring.
–Push the top mold on and press it down.
–Move the cylinder up and down and slide it out.
–Tap lightly around the mold and slowly pull off the top half and then the bottom half and
–lay the bath bombs out to dry for 24 hours before packaging.
–This three-piece press allows you to shape a perfect Devil with whichever size “Saturn ring” you prefer.
WARM NOTE:
I use top-grade PLA PRO+ for our molds. I take the pro over the regular one WITHOUT additional charges so you can enjoy the best quality molds. Colors vary based on our filament supply and choice, though we generally use black. All mold designs are tested with different bath bomb recipes before being listed, and each mold is inspected before shipping it out.
CARE INSTRUCTIONS
The PLA is heat-sensitive. So all cleaning must be done using cold water, and never in the dishwasher. Store the molds indoors and never in a hot shed or car as it can cause the molds to warp. In addition, make sure not to soak them as the molds can hold water between the PLA fibers.
Our Love Pill Bath Bomb Mold is printed using 3D printing technology. The sandwich-type mold makes it easy to press adorable Love Pill bath bombs quickly and easily!
All mold designs are tested with different bath bomb recipes before being listed, and each mold is inspected before shipping it out.
SPECS:
Love Pill Bottom Piece
Love Pill Top piece
Love Pill Bath Bomb Cylinder
Available sizes: 2 | 2.5 | 3 | 3.5 | 4 | 4.5
HOW TO USE:
–Place the cylinder on a surface and slide the bottom half of the mold in.
–Fill to the top of the outer ring with your bath bomb mixture, don’t pack it in.
–Then press the top half of the mold into the outer ring.
–Push the top mold on and press it down.
–Move the cylinder up and down and slide it out.
–Tap lightly around the mold and slowly pull off the top half and then the bottom half and
–lay the bath bombs out to dry for 24 hours before packaging.
–This three-piece press allows you to shape a perfect Devil with whichever size “Saturn ring” you prefer.
WARM NOTE:
I use top-grade PLA PRO+ for our molds. I take the pro over the regular one WITHOUT additional charges so you can enjoy the best quality molds. Colors vary based on our filament supply and choice, though we generally use black. All mold designs are tested with different bath bomb recipes before being listed, and each mold is inspected before shipping it out.
CARE INSTRUCTIONS
The PLA is heat-sensitive. So all cleaning must be done using cold water, and never in the dishwasher. Store the molds indoors and never in a hot shed or car as it can cause the molds to warp. In addition, make sure not to soak them as the molds can hold water between the PLA fibers.
Our Winged Heart Bath Bomb Mold is printed using 3D printing technology. The sandwich-type mold makes it easy to press adorable Winged Heart bath bombs quickly and easily!
All mold designs are tested with different bath bomb recipes before being listed, and each mold is inspected before shipping it out.
SPECS:
Winged Heart Bottom Piece
Winged Heart Top piece
Winged Heart Bath Bomb Cylinder
Available sizes: 2 | 2.5 | 3 | 3.5 | 4 | 4.5
HOW TO USE:
–Place the cylinder on a surface and slide the bottom half of the mold in.
–Fill to the top of the outer ring with your bath bomb mixture, don’t pack it in.
–Then press the top half of the mold into the outer ring.
–Push the top mold on and press it down.
–Move the cylinder up and down and slide it out.
–Tap lightly around the mold and slowly pull off the top half and then the bottom half and
–lay the bath bombs out to dry for 24 hours before packaging.
–This three-piece press allows you to shape a perfect Devil with whichever size “Saturn ring” you prefer.
WARM NOTE:
I use top-grade PLA PRO+ for our molds. I take the pro over the regular one WITHOUT additional charges so you can enjoy the best quality molds. Colors vary based on our filament supply and choice, though we generally use black. All mold designs are tested with different bath bomb recipes before being listed, and each mold is inspected before shipping it out.
CARE INSTRUCTIONS
The PLA is heat-sensitive. So all cleaning must be done using cold water, and never in the dishwasher. Store the molds indoors and never in a hot shed or car as it can cause the molds to warp. In addition, make sure not to soak them as the molds can hold water between the PLA fibers.
Our Boxers Bath Bomb Mold is printed using 3D printing technology. The sandwich-type mold makes it easy to press adorable Boxer's bath bombs quickly and easily!
All mold designs are tested with different bath bomb recipes before being listed, and each mold is inspected before shipping it out.
SPECS:
Boxers Bottom Piece
Boxers Top piece
Boxers Bath Bomb Cylinder
Available sizes: 2.5 | 3 | 3.5 | 4 | 4.5
HOW TO USE:
–Place the cylinder on a surface and slide the bottom half of the mold in.
–Fill to the top of the outer ring with your bath bomb mixture, don’t pack it in.
–Then press the top half of the mold into the outer ring.
–Push the top mold on and press it down.
–Move the cylinder up and down and slide it out.
–Tap lightly around the mold and slowly pull off the top half and then the bottom half and
–lay the bath bombs out to dry for 24 hours before packaging.
–This three-piece press allows you to shape a perfect Devil with whichever size “Saturn ring” you prefer.
WARM NOTE:
I use top-grade PLA PRO+ for our molds. I take the pro over the regular one WITHOUT additional charges so you can enjoy the best quality molds. Colors vary based on our filament supply and choice, though we generally use black. All mold designs are tested with different bath bomb recipes before being listed, and each mold is inspected before shipping it out.
CARE INSTRUCTIONS
The PLA is heat-sensitive. So all cleaning must be done using cold water, and never in the dishwasher. Store the molds indoors and never in a hot shed or car as it can cause the molds to warp. In addition, make sure not to soak them as the molds can hold water between the PLA fibers.
Our Rainbow Bath Bomb Mold is printed using 3D printing technology. The sandwich-type mold makes it easy to press adorable Rainbow bath bombs quickly and easily!
All mold designs are tested with different bath bomb recipes before being listed, and each mold is inspected before shipping it out.
SPECS:
Rainbow Bottom Piece
Rainbow Top piece
Rainbow Bath Bomb Cylinder
Available sizes: 2.5 | 3 | 3.5 | 4 | 4.5
HOW TO USE:
–Place the cylinder on a surface and slide the bottom half of the mold in.
–Fill to the top of the outer ring with your bath bomb mixture, don’t pack it in.
–Then press the top half of the mold into the outer ring.
–Push the top mold on and press it down.
–Move the cylinder up and down and slide it out.
–Tap lightly around the mold and slowly pull off the top half and then the bottom half and
–lay the bath bombs out to dry for 24 hours before packaging.
–This three-piece press allows you to shape a perfect Devil with whichever size “Saturn ring” you prefer.
WARM NOTE:
I use top-grade PLA PRO+ for our molds. I take the pro over the regular one WITHOUT additional charges so you can enjoy the best quality molds. Colors vary based on our filament supply and choice, though we generally use black. All mold designs are tested with different bath bomb recipes before being listed, and each mold is inspected before shipping it out.
CARE INSTRUCTIONS
The PLA is heat-sensitive. So all cleaning must be done using cold water, and never in the dishwasher. Store the molds indoors and never in a hot shed or car as it can cause the molds to warp. In addition, make sure not to soak them as the molds can hold water between the PLA fibers.
Our 3 X SPHERE BATH BOMBS Bath Bomb Mold is printed using 3D printing technology. The sandwich-type mold makes it easy to press adorable Hello SPHERE bath bombs quickly and easily!
All mold designs are tested with different bath bomb recipes before being listed, and each mold is inspected before shipping it out.
SPECS:
(3 X SPHERE BATH BOMBS) Bottom Piece
(3 X SPHERE BATH BOMBS) Top piece
(3 X SPHERE BATH BOMBS) Bath Bomb Cylinder
Available sizes: 1.5 | 2 | 2.5 | 3 | 3.5
HOW TO USE:
–Place the cylinder on a surface and slide the bottom half of the mold in.
–Fill to the top of the outer ring with your bath bomb mixture, don’t pack it in.
–Then press the top half of the mold into the outer ring.
–Push the top mold on and press it down.
–Move the cylinder up and down and slide it out.
–Tap lightly around the mold and slowly pull off the top half and then the bottom half and
–lay the bath bombs out to dry for 24 hours before packaging.
–This three-piece press allows you to shape a perfect 3 X Sphere with whichever size
“Saturn ring” you prefer.
WARM NOTE:
I use top-grade PLA PRO+ for our molds. I take the pro over the regular one WITHOUT
additional charges so you can enjoy the best quality molds. Colors vary based on our
filament supply and choice, though we generally use black.
All mold designs are tested with different bath bomb recipes before being listed, and each
mold is inspected before shipping it out.
CARE INSTRUCTIONS
The PLA is heat-sensitive. So all cleaning must be done using cold water, and never in the
dishwasher. Store the molds indoors and never in a hot shed or car as it can cause the molds
to warp. In addition, make sure not to soak them as the molds can hold water between the
PLA fibers.
Our 16 X SPHERE BATH BOMBS Bath Bomb Mold is printed using 3D printing technology. The sandwich-type mold makes it easy to press adorable Hello SPHERE bath bombs quickly and easily!
All mold designs are tested with different bath bomb recipes before being listed, and each mold is inspected before shipping it out.
SPECS:
(16 X SPHERE BATH BOMBS) Bottom Piece
(16 X SPHERE BATH BOMBS) Top piece
(16 X SPHERE BATH BOMBS) Bath Bomb Cylinder
Available sizes: 1 | 1.25 | 1.5 (of each sphere)
HOW TO USE:
–Place the cylinder on a surface and slide the bottom half of the mold in.
–Fill to the top of the outer ring with your bath bomb mixture, don’t pack it in.
–Then press the top half of the mold into the outer ring.
–Push the top mold on and press it down.
–Move the cylinder up and down and slide it out.
–Tap lightly around the mold and slowly pull off the top half and then the bottom half and
–lay the bath bombs out to dry for 24 hours before packaging.
–This three-piece press allows you to shape a perfect 9 X SPHERE with whichever size
“Saturn ring” you prefer.
WARM NOTE:
I use top-grade PLA PRO+ for our molds. I take the pro over the regular one WITHOUT
additional charges so you can enjoy the best quality molds. Colors vary based on our
filament supply and choice, though we generally use black.
All mold designs are tested with different bath bomb recipes before being listed, and each
mold is inspected before shipping it out.
CARE INSTRUCTIONS
The PLA is heat-sensitive. So all cleaning must be done using cold water, and never in the
dishwasher. Store the molds indoors and never in a hot shed or car as it can cause the molds
to warp. In addition, make sure not to soak them as the molds can hold water between the
PLA fibers.
Our PAW Bath Bomb Mold is printed using 3D printing technology. The sandwich-type mold makes it easy to press adorable PAW bath bombs quickly and easily!
All mold designs are tested with different bath bomb recipes before being listed, and each mold is inspected before shipping it out.
SPECS:
PAW Bottom Piece
PAW Top piece
PAW Bath Bomb Cylinder
Available sizes: 2.5 | 3 | 3.5 | 4
HOW TO USE
–Place the cylinder on a surface and slide the bottom half of the mold in.
–Fill to the top of the outer ring with your bath bomb mixture, don’t pack it in.
–Then press the top half of the mold into the outer ring.
–Push the top mold on and press it down.
–Move the cylinder up and down and slide it out.
–Tap lightly around the mold and slowly pull off the top half and then the bottom half and
–lay the bath bombs out to dry for 24 hours before packaging.
–This three-piece press allows you to shape a perfect Paw with whichever size
“Saturn ring” you prefer.
WARM NOTE:
I use top-grade PLA PRO+ for our molds. I take the pro over the regular one WITHOUT additional charges so you can enjoy the best quality molds. Colors vary based on our filament supply and choice, though we generally use black. All mold designs are tested with different bath bomb recipes before being listed, and each mold is inspected before shipping it out.
CARE INSTRUCTIONS
The PLA is heat-sensitive. So all cleaning must be done using cold water, and never in the dishwasher. Store the molds indoors and never in a hot shed or car as it can cause the molds to warp. In addition, make sure not to soak them as the molds can hold water between the PLA fibers.
Embed maker bath bomb mold. 3D printed, lets you make 25 embeds of half inch sized embeds
in ONE batch 3 Piece Mold Set. Includes 1 top, 1 bottom and 1 sleeve/cylinder.
SPECS:
Mold Size of 5x5 = makes 25 embeds at 0.5” * 0.5” approx.
The thickness and weight of each embed will vary depending on how much mixture you use.
instead of ice trays, there is a better way to do this, we created this tool to help my bath bomb production, hopefully, it can help you too!
All my molds are printed in high-quality PLA+, ensuring robust bath bomb molds.
The mold contains 3 pieces: Base, Sleeve, and Plunger. The Colour may vary, but I usually print it black.
HOW TO USE:
Place sleeve on base. Add your embed mixture. Place the top inside the sleeve, and then simply press down hard and unmold.
WARM NOTE:
I use top-grade PLA PRO+ for our molds. I take the pro over the regular one WITHOUT additional charges so you can enjoy the best quality molds. Colors vary based on our filament supply and choice, though we generally use black. All mold designs are tested with different bath bomb recipes before being listed, and each mold is inspected before shipping it out.
CARE INSTRUCTIONS
The PLA is heat-sensitive. So all cleaning must be done using cold water, and never in the dishwasher. Store the molds indoors and never in a hot shed or car as it can cause the molds to warp. In addition, make sure not to soak them as the molds can hold water between the PLA fibers.
When you first started making bath bombs you probably started with the classic round
shape.
I think most of us start there.
It is, after all, iconic. And instantly recognizable. And arguably essential to the bath bomb game.
For this, we have Classic Bomb Bath Bomb Mold.
It is printed using 3D printing technology. The sandwich-type mold makes it easy to press
adorable and precise Classic Bomb bath bombs quickly and easily!
SPECS:
Classic Bomb Bottom Piece
Classic Bomb Top Plunger
Classic Bomb Bath Bomb Cylinder
Available sizes: 1.25 | 1.50 | 1.75 | 2 | 2.25 | 2.5 | 2.75 | 3 | 3.25 | 3.5 |
3.75 | 4 | 4.5
HOW TO USE:
–Place the cylinder on a surface and slide the bottom half of the mold in.
–Fill to the top of the outer ring with your bath bomb mixture, don’t pack it in.
–Then press the top half of the mold into the outer ring.
–Push the top mold on and press it down.
–Move the cylinder up and down and slide it out.
–Tap lightly around the mold and slowly pull off the top half and then the bottom half and
–lay the bath bombs out to dry for 24 hours before packaging.
–This three-piece press allows you to shape a perfect Classic Sphere with whichever size
“Saturn ring” you prefer.
WARM NOTE:
I use top-grade PLA PRO+ for our molds. I take the pro over the regular one WITHOUT
additional charges so you can enjoy the best quality molds. Colors vary based on our
filament supply and choice, though we generally use black.
All mold designs are tested with different bath bomb recipes before being listed, and each
mold is inspected before shipping it out.
CARE INSTRUCTIONS
The PLA is heat-sensitive. So all cleaning must be done using cold water, and never in the
dishwasher. Store the molds indoors and never in a hot shed or car as it can cause the molds
to warp. In addition, make sure not to soak them as the molds can hold water between the
PLA fibers.
Our 3D ROSE Bath Bomb Mold is printed using 3D printing technology. The sandwich-type mold makes it easy to press adorable 3D ROSE bath bombs quickly and easily!
All mold designs are tested with different bath bomb recipes before being listed, and each mold is inspected before shipping it out.
SPECS:
3D ROSE Bottom Piece
3D ROSE Top piece
3D ROSE Bath Bomb Cylinder
Available sizes: 2.5 | 3 | 3.5 | 4
HOW TO USE
–Place the cylinder on a surface and slide the bottom half of the mold in.
–Fill to the top of the outer ring with your bath bomb mixture, don’t pack it in.
–Then press the top half of the mold into the outer ring.
–Push the top mold on and press it down.
–Move the cylinder up and down and slide it out.
–Tap lightly around the mold and slowly pull off the top half and then the bottom half and
–lay the bath bombs out to dry for 24 hours before packaging.
–This three-piece press allows you to shape a perfect 3D ROSE with whichever size
“Saturn ring” you prefer.
WARM NOTE:
I use top-grade PLA PRO+ for our molds. I take the pro over the regular one WITHOUT
additional charges so you can enjoy the best quality molds. Colors vary based on our
filament supply and choice, though we generally use black.
All mold designs are tested with different bath bomb recipes before being listed, and each
mold is inspected before shipping it out.
CARE INSTRUCTIONS
The PLA is heat-sensitive. So all cleaning must be done using cold water, and never in the
dishwasher. Store the molds indoors and never in a hot shed or car as it can cause the molds
to warp. In addition, make sure not to soak them as the molds can hold water between the
PLA fibers.
Cookie Bath Bomb Mold – The Bath Time
Cube Bath Bomb Mold – The Bath Time
ALL 11 Bath Bomb Mold Sizes, Heavy Duty Stainless Steel, Includes
Bath Bomb Mold - Extra Large Size - 2 Set 4 Pieces
Dreidel Bath Bomb Mold – The Bath Time
Products – The Bath Time
40 Mirror Crafts For Unique Decor Mod Podge Rocks
Best Sellers Molds – The Bath Time
Dreidel Bath Bomb Mold – The Bath Time
Products – The Bath Time
THE BATH TIME - The largest collection of Bath Bomb Molds Online
3 X Spheres Bath Bomb Mold – The Bath Time
