Glaxs is a high adhesion system for indoor and outdoor bonding of ceramic, porcelain, and similar surfaces.
Glaxs is a high adhesion system for indoor and outdoor bonding of ceramic, porcelain, and similar surfaces.
Transparent Cartridge Glue
Available in a wide variety of colors. Requires use of special M200XMR Cartridge Gun.
GLAXS ADVANTAGES:
VOC free
Excellent adhesion
Ultra rapid
Excellent color stability to sunlight
Glossy, shiny and easy to polish
Indoor and Outdoor use
Pre-dosed for easy dispensing
Comes with 2 mixing nozzles
GLAXS CLEAN WHITE INSTRUCTIONS FOR USE:
All the surfaces to be treated must be cleaned and free of dust and grease.
In case of glossy and/or smooth surfaces, we suggest to scrub the surfaces with sandpaper before gluing.
Remove the threaded extremity and uncap the cartridge.
Fix the mixer to the cartridge through the threaded nozzle.
Before applying the glue on the surfaces, do spurge around 5 gr in line.
Use only guns approved by Tenax, MK Sulzer ratio 2+1 H236M and Mixpac DM200-01 ratio 2+1.
After usage, clean the nozzle, replace the cap and discard the mixer after use. Product will not set below +1°C.
SHELF LIFE:
Glaxs Clean White in cartridge will last at least 12 months, in normal conditions between 18-25°c, kept away from source of heat, humidity and sun light.
SAFETY RULES:
Resin and hardener are chemical products, please read the safety data sheet before usage and the rules written on the product label.
Gel time in bulk at 77°: 3-5 min
Tacky free time at 77°: approx. 15 min
Working time at 77°: 45-60 min
Temp range for use after hardening: -13°F to 140°F
Viscosity cps 25°C 20 r.p.m (ASTM D2196)
tixotropic liquid
Density at 25°C gr/cm3
1.27
Aspect
colored liquid
Ratio of use glue/hardener
2+1
Gel time (in bulk) at 25°C in min
3-5 min
Time for handling pieces
15-20 min
Working time suggested at 25°C in min
45-60 min
Minimum reaction temperature
+1°C
Minimun temperature of use after hardening
-25°C
Minimun temperature of use after hardening
+60°C
Shelf life at 18-20°C
24 months
Adhesion force in MPa at 25°C on natural stone, diamond cut surface after 1 hour (ASTM D 4541)*
9.0 - 10.0
Adhesion force in MPa at 25°C on natural stone, diamond cut surface after 24 hours (ASTM D 4541)*
9.5 - 10.5
Adhesion force in MPa at 25°C on quartz, diamond cut surface after 1 hour (ASTM D 4541)*
9.0 - 10.0
Adhesion force in MPa at 25°C on quartz, diamond cut surface after 24 hours (ASTM D 4541)*
12.0 - 13.0
Adhesion force in MPa at 25°C on ceramic, diamond cut surface after 1 hour (ASTM D 4541)*
9.0 - 11.0
Adhesion force in MPa at 25°C on ceramic, diamond cut surface after 24 hours (ASTM D 4541)*
10.0 - 13.0
Clean White Glaxs Cartridge Glue for Fabrication of Sintered Stone, Porcelain, and Ceramic Surfaces
All For Stone Epoxy adhesive for marble and granite
Tenax Glaxs Fast 2+1 Fast Transparent 215 ml: : Tools & Home Improvement
DECREASE FABRICATION TIME - Ready to cut and polish stone in under 30 minutes NEW GENERATION BI-COMPONENT RESIN - Zero yellowing to the sun and UV
Tenax Glaxs Shade 103 - Fast Cartridge 215 ml - Stone Fabrication Glue - Marble Glue - Stone Glue - Ceramic Glue (Cartridge and 2 Nozzles)
Tenax Glaxs Cartridge Glue, Stone Glue
Glaxs Cartridge Glue System, Ceramic Porcelain Glue System
Zero Yellowing, Ultra Fast Curing White Glue Designed for White Stone
Tenax Glue Cartridge Guns and Glues
TENAX Marble and Stone Glue and Filling 1L Adhesive - Transparent for sale online
Distributors With Direct Website LinksKobi ToolsGranQuartzDiamond Tool StoreEastern Marble & GraniteTenax has distributors across the USA. Please
Absolute Black - P Glaxs Cartridge Adhesive
Tenax Glue Cartridge Guns and Glues
NEW TENAX GLAXS FAST PACK 215ml CARTRIDGE TWO PART ADHESIVE GLUE GRANITE MARBLE
Glues and surface treatments • Levanto Oy Oy
Tenax Glaxs BB65 Glue Super Flowing Pouches 315 gm
Tenax 2:1 Cartridge Gun