2.5 inch nozzle tips, 5 ct. Works with E-6000 adhesive, FITS 3.7 oz TU – My  Supplies Source

2.5 inch nozzle tips, 5 ct. Works with E-6000 adhesive, FITS 3.7 oz TU – My Supplies Source

5
(199)
Write Review
More
$ 2.50
Add to Cart
In stock
Description

********** PLEASE NOTE: These tips ONLY fit the 3.7oz tube of e6000, (not included with this listing, but available in my shop) : ************ Get added control when applying E-6000 adhesive! These 2.5" long nozzles screw directly onto the 3.7 oz (110 ml) size E-6000 tubes. You can pierce a hole in the end for a super

********** PLEASE NOTE: These tips ONLY fit the 3.7oz tube of e6000, (not included with this listing, but available in my shop) : ************

Get added control when applying E-6000 adhesive! These 2.5 long nozzles screw directly onto the 3.7 oz (110 ml) size E-6000 tubes. You can pierce a hole in the end for a super fine tip, but there are more ways than that to use these nozzles! If you look at the nozzles closely, you'll notice that each nozzle has 5 steps to it. You can cut one nozzle at each step (you get 5 nozzles- see how cool this works!) therefore giving you 5 different sized glue applicators. It's like having 5 different sized glue bottles all in one! (Glue not included)
5 nozzle tips

Cool tip for cleaning the nozzles:
there will be a little bit of glue left in the nozzle when you are done using it. Remove the nozzle from the glue tube and replace the cap onto the tube. Insert a small wooden dowel, Popsicle stick, etc. into the wet glue in the nozzle and allow to dry. Since the glue doesn't completely adhere to the material the nozzle is made out of, you can easily pull out the remaining glue, which is now stuck to the wood. Discard the wooden stick, or if you'd like to reuse it, just peel the glue off and keep it handy for next time!

RLECS 20pcs Snip Tip Applicator Adhesive Tube Tips Cap for E6000 Craft Glue 3.7 Ounce Adhesive Tubes, White : Arts, Crafts & Sewing

********** PLEASE NOTE: These tips ONLY fit the 3.7oz tube of e6000, (not included with this listing, but available in my shop) : ************ Get

2.5 inch nozzle tips, 5 ct. Works with E-6000 adhesive, FITS 3.7 oz TUBE ONLY!

E6000 Craft Adhesive: The ultimate choice for arts and crafts, E6000 craft glue ensures a strong, clear bond on a variety of surfaces. Ideal for both

E6000 3.7 Ounce (109.4mL) Tube Industrial Strength Adhesive for Crafting, 10 Snip Tip Applicator Tips and Pixiss Art Dotting Stylus Pens 5 pcs Set

Replacement Adhesive Nozzle and Caps, 2 pieces - Wood Glues

1 x E6000 Craft Glue 110ml Applicator Tip 4pc

Eclectic Products E6000 Craft Glue 3.7oz Applicator Tip

Nozzle Tip, 2.5 x 1.63 SC HP

Can be attached to a Quick-Connect Wand for swifter application and morePROP 65 WARNING: This product can expose you to some kind of chemical, which is known to the State of California to cause cancer.

Snowyinglan Pressure Washer Nozzles Tips Set, 1/4 inch Quick Connect - 5 Degrees Nozzles with 2 Second Story Nozzles, 7 Pack (2.5 GPM)

Surebonder Glue Gun Nozzels, Set of 4

Eclectic Products Incorporated 2OZ E-6000 Adhesive : Industrial & Scientific

1st Choice Snip Tip Applicator Tips Cap for E6000 Craft Glue 3.7 Ounce Adhesive Tubes (4 pc) : Tools & Home Improvement

5Pcs Pressure Washer Nozzles Tips - Replacement Sprayer Nozzle Tips for Pressure Washers 2700 PSI Pressure Washer Accessories, 2.3 GPM, Model # 6022, 6023, Size 3.0 Or 030 High Pressure Aeroponics Kit : Patio, Lawn & Garden